Chapter 21 Logs
AMG1302-T10A User’s Guide
212
For type and code details, see Table 93 on page 214.
board %d line %d channel %d,
call %d, %s C02 OutCall
Connected %d %s
The PPPoE, PPTP or dial-up call is connected.
board %d line %d channel %d,
call %d, %s C02 Call Terminated
The PPPoE, PPTP or dial-up call was disconnected.
Table 87 PPP Logs
LOG MESSAGE DESCRIPTION
ppp:LCP Starting
The PPP connection’s Link Control Protocol stage has started.
ppp:LCP Opening
The PPP connection’s Link Control Protocol stage is opening.
ppp:CHAP Opening
The PPP connection’s Challenge Handshake Authentication Protocol stage is
opening.
ppp:IPCP Starting
The PPP connection’s Internet Protocol Control Protocol stage is starting.
ppp:IPCP Opening
The PPP connection’s Internet Protocol Control Protocol stage is opening.
ppp:LCP Closing
The PPP connection’s Link Control Protocol stage is closing.
ppp:IPCP Closing
The PPP connection’s Internet Protocol Control Protocol stage is closing.
Table 88 UPnP Logs
LOG MESSAGE DESCRIPTION
UPnP pass through Firewall
UPnP packets can pass through the firewall.
Table 89 Content Filtering Logs
LOG MESSAGE DESCRIPTION
%s: block keyword
The content of a requested web page matched a user defined keyword.
%s
The system forwarded web content.
Table 90 Attack Logs
LOG MESSAGE DESCRIPTION
attack [ TCP | UDP | IGMP |
ESP | GRE | OSPF ]
The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF attack.
attack ICMP (type:%d,
code:%d)
The firewall detected an ICMP attack.
land [ TCP | UDP | IGMP |
ESP | GRE | OSPF ]
The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF land attack.
land ICMP (type:%d,
code:%d)
The firewall detected an ICMP land attack.
ip spoofing - WAN [ TCP |
UDP | IGMP | ESP | GRE |
OSPF ]
The firewall detected an IP spoofing attack on the WAN port.
Table 86 CDR Logs (continued)
LOG MESSAGE DESCRIPTION