Chapter 2 The Web Configurator
AMG1302-T10A User’s Guide
22
5 The following screen displays if you have yet changed your password. It is strongly recommended
you change the default password. Enter a new password, retype it to confirm and click Apply;
alternatively click Ignore to proceed to the main menu if you do not want to change the password
now.
Figure 5 Change Password Screen
6 Select Go to Wizard setup and click Apply to display the wizard main screen. Otherwise, select
Go to Advanced setup and click Apply to display the Status screen.
Figure 6 Replace Factory Default Certificate Screen
Note: For security reasons, the Device automatically logs you out if you do not use the
web configurator for five minutes (default). If this happens, log in again.
To Next Page
Loading...
