Chapter 5 Internet Setup Wizard
AMG1302-T10A User’s Guide
67
The following table describes the labels in this screen.
5 Click Apply to save your wireless LAN settings.
Figure 29 Wireless LAN Setup 3
6 Use the read-only summary table to check whether what you have configured is correct. Click
Finish to complete and save the wizard setup.
Table 16 Manually Assign a WEP key
LABEL DESCRIPTION
Key The WEP keys are used to encrypt data. Both the Device and the wireless stations
must use the same WEP key for data transmission.
Enter any 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters ("0-9", "A-
F") for a 64-bit or 128-bit WEP key respectively.
Back Click this to return to the previous screen without saving.
Next Click this to continue to the next wizard screen.
Exit Click this to close the wizard screen without saving.
To Next Page
Loading...
