ZyXEL Communications Ethernet Switch User Manual

Chapter 49 OSPF Commands
Ethernet Switch CLI Reference Guide
208
49.3 Command Examples
In this example, the Switch (A) is an Area Border Router (ABR) in an OSPF network.
Figure 7 OSPF Network Example
redistribute static metric-type <1|2>
metric <0-16777214>
Sets the Switch to learn static routing
information which will use the specified
metric information.
C13
redistribute static Sets the switch to redistribute static routing
information.
Route redistribution allows your Switch to
import and translate external routes
learned through other routing protocols
(RIP and Static) into the OSPF network
transparently.
C13
no redistribute static Sets the Switch not to learn static routing
information.
C13
passive-iface <ip-addr/bits> Sets the interface to be passive. A passive
interface does not send or receive OSPF
traffic.
C13
no passive-iface <ip-addr/bits> Sets the interface to not be passive. C 13
summary-address <ip-address> <mask> Sets a summary address which is a
network IP address used to cover more
than one network routing entry in order to
reduce the routing table size.
C13
no summary-address <ip-address> <mask> Removes a summary address. C 13
show router ospf summary-address Displays all summary addresses on the
Switch.
E3
no router ospf Disables OSPF on the Switch. C 13
Table 118 OSPF Command Summary (continued)
COMMAND DESCRIPTION M P
Area 0
Backbone
Area 1
IP: 172.16.1.1
A

ZyXEL Communications Ethernet Switch Specifications

General

Brand	ZyXEL Communications
Model	Ethernet Switch
Category	Network Router
Language	English