ZyXEL Communications Ethernet Switch User Manual

Chapter 63 RMON
Ethernet Switch CLI Reference Guide
250
63.3 Command Summary
The following section lists the commands for this feature.
Table 139 rmon Command Summary
COMMAND DESCRIPTION M P
rmon alarm alarmtable <alarm-index> variable
<variable> interval <interval-integer>
sample-type <absolute|delta> startup-alarm
<startup-alarm> rising-threshold <rising-
integer> <event-index> falling-threshold
<falling-integer> <event-index> [owner
<owner>]
Sets an alarm that occurs when the
sampled data exceeds the specified
threshold. See Section 63.3.2 on page 251
for more information.
C13
rmon event eventtable <event-index> [log]
[trap <community>] [owner <owner>]
[description <description>]
Sets the actions that the Switch takes when
an associated alarm is generated by the
Switch.
log: set this to have the Switch record the
logs for the alarm
trap <community>: set this to have the
Switch send a trap with the specified
community.
description: the description of the
event.
C13
rmon history historycontrol <historycontrol-
index> buckets <1-65535> interval <1-3600>
port-channel <interface-id> [owner <owner>]
Sets RMON history configuration settings.
buckets <1-65535>: the number of data
samplings the network manager requests
the Switch to store. At the time of writing,
the Switch can only store up to 200 data
samplings although you can configure a
bucket number higher than 200.
interval <1-3600>: the time in
seconds between data samplings.
C13
rmon statistics etherstats <etherstats-index>
port-channel <interface-id> [owner <owner>]
Sets to collect network traffic on the
specified Ethernet port since the last time
the Switch was reset.
C13
no rmon alarm alarmtable <alarm-index> Removes the specified alarm’s settings. C 13
no rmon event eventtable <event-index> Removes the action’s settings of the
specified event.
C13
no rmon history historycontrol
<historycontrol-index>
Removes the RMON history configuration
settings for the specified event.
C13
no rmon statistics etherstats <etherstats-
index>
Stops collecting network traffic for the
specified event.
C13
show rmon alarm alarmtable [alarm-index] Displays all or the specified alarm settings. E 3
show rmon event eventtable [event-index] Displays all or the specified event settings. E 3
show rmon history historycontrol [index
<historycontrol-index>]
Displays all historical network traffic
statistics or only the specified entry’s.
E3
show rmon history historycontrol port-channel
<interface-id>
Displays historical network traffic statistics
for the specified port.
E3
show rmon statistics etherstats [index
<etherstats-index>]
Displays all current network traffic statistics
or only the specified entry’s.
E3
show rmon statistics etherstats port-channel
<interface-id>
Displays current network traffic statistics for
the specified port.
E3

ZyXEL Communications Ethernet Switch Specifications

General

Brand	ZyXEL Communications
Model	Ethernet Switch
Category	Network Router
Language	English