Chapter 80 VLAN Mapping Commands
Ethernet Switch CLI Reference Guide
306
80.2 Command Examples
This example enables VLAN mapping on the Switch and creates a VLAN mapping rule to
translate the VLAN ID from 123 to 234 in the packets received on port 4.
This example enables VLAN mapping on port 4.
sysname# configure
sysname(config)# vlan-mapping
sysname(config)# vlan-mapping name test interface port-channel 4 vlan 123
translated-vlan 234 priority 3
sysname(config)#
sysname# configure
sysname(config)# interface port-channel 4
sysname(config-interface)# vlan-mapping
sysname(config-interface)# exit
sysname(config)#
To Next Page
Loading...
