ZyXEL Communications GS1900-8 - Configure Port

GS1900 Series User’s Guide
101
CHAPTER 19
Configuration: Port
19.1 Overview
This section provides information for Port in Configuration.
19.1.1 What You Can Do in this Chapter
• The Port screen (Section 19.2 on page 101) displays general port settings.
• The EEE screen (Section 19.3 on page 103) displays the port EEE settings.
• The PoE screen (Section 19.4 on page 104) displays the port PoE settings.
• The Bandwidth Management screen (Section 19.5 on page 109) displays the port ingress and
egress settings.
• The Storm Control screen (Section 19.6 on page 111) displays the port storm control settings.
19.2 Port
Use this screen to view Switch port settings and select ports for configuration. Click Configuration
> Port > Port > Port to open this screen.
Figure 93 Configuration > Port > Port > Port
The following table describes the labels in this screen.
Table 60 Configuration > Port > Port > Port
LABEL DESCRIPTION
Port
Edit Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Port Displays the port index number.