ZyXEL Communications GS1900-8 - The Static MAC Add Screen; The Filtering MAC Screen

Chapter 21 Configuration: MAC Table
GS1900 Series User’s Guide
127
21.2.2 The Static MAC Add Screen
Use this screen to add new Static MAC addresses. Click Configuration > MAC Table > Static
MAC > Add to open this screen.
Figure 119 Configuration > MAC Table > Static MAC > Add
The following table describes the labels in this screen.
21.2.3 The Filtering MAC Screen
Use this screen to view Filtering MAC addresses. Click Configuration > MAC Table > Filtering
MAC to open this screen.
Figure 120 Configuration > MAC Table > Filtering MAC
VLAN Displays the VLAN group to which this frame belongs.
Port Displays the port from which the above MAC address was learned.
Action Click Delete to remove the MAC address.
Table 84 Configuration > MAC Table > Static MAC (continued)
LABEL DESCRIPTION
Table 85 Configuration > MAC Table > Static MAC > Add
LABEL DESCRIPTION
Static MAC
MAC Address Enter the object MAC address.
VLAN Select the VLAN group which to associate the MAC address.
Port Select the port which to associate the above MAC address.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.