ZyXEL Communications GS1900-8 - The Port Edit Screen

Chapter 27 Configuration: LLDP
GS1900 Series User’s Guide
162
Figure 154 Configuration > LLDP > Port
The following table describes the labels in this screen.
27.2.3 The Port Edit Screen
Use this screen to configure the Port Edit settings. Click Configuration > LLDP > Port > Edit to
open this screen.
Table 120 Configuration > LLDP > Port
LABEL DESCRIPTION
LLDP VLAN
Edit Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Port Displays the index number of the LLDP port.
Mode Displays the mode of the LLDP port as Disable, Tx Only, Rx Only, or Tx & Rx.
Optional TLV
Select
Displays the TLV as one or more of the following options:
•SN - System Name
• PD - Port Description
• SD - System Description
• SC - System Capability
• MP - 802.3 MAC-PHY
• LA - 802.3 Link Aggregation
• MFS - 802.3 Maximum Frame Size
• MA - Management Address