GS1900 Series User’s Guide
126
CHAPTER 21
Configuration: MAC Table
21.1 Overview
This section provides information for MAC Table in Configuration.
The MAC Table screen (a MAC table is also known as a filtering database) shows how frames are
forwarded or filtered across the Switch’s ports. When a device (which may belong to a VLAN group)
sends a packet which is forwarded to a port on the Switch, the MAC address of the device is shown
on the Switch’s MAC Table. It also shows whether the MAC address is dynamic (learned by the
Switch) or static (manually entered in the Static MAC Forwarding screen).
21.1.1 What You Can Do in this Chapter
The MAC Table screen (Section 21.2 on page 126) displays Static MAC, Filtering MAC, and Dynamic
MAC settings.
21.2 MAC Table
21.2.1 The Static MAC Screen
Use this screen to view Static MAC addresses settings. Click Configuration > MAC Table > Static
MAC to open this screen.
Figure 118 Configuration > MAC Table > Static MAC
The following table describes the labels in this screen.
Table 84 Configuration > MAC Table > Static MAC
LABEL DESCRIPTION
Static MAC
Add Click Add to create a new Static MAC entry.
MAC Address Displays the object MAC address from which this incoming frame came.
To Next Page
Loading...
