ZyXEL Communications GS1900-8 - The Port Edit Screen

Chapter 29 Configuration: Security
GS1900 Series User’s Guide
190
29.5.3 The Port Edit Screen
Use this screen to configure the Port settings.
Click Configuration > Security > DoS > Port > Edit to open this screen.
Figure 181 Configuration > Security > DoS > Port > Edit
The following table describes the labels in this screen.
Port Displays the port index value.
State Displays the port’s DoS feature as Enable or Disable.
Table 146 Configuration > Security > DoS > Port
LABEL DESCRIPTION
Table 147 Configuration > Security > DoS > Port > Edit
LABEL DESCRIPTION
Port
Port List Displays the port index value.
State Select Enable to activate the port’s DoS feature.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.