ZyXEL Communications GS1900-8 - Trust Mode; The Global Screen; The Port Screen

Chapter 28 Configuration: QoS
GS1900 Series User’s Guide
179
28.3 Trust Mode
28.3.1 The Global Screen
Use this screen to view the Global settings. Click Configuration > QoS > Trust Mode to open
this screen.
Figure 168 Configuration > QoS > Trust Mode
The following table describes the labels in this screen.
28.3.2 The Port Screen
Use this screen to view the Port settings. Click Configuration > QoS > Trust Mode > Port to
open this screen.
Queue to IP Precedence Mapping
Queue ID Displays a listing of Queue ID, range: 0 - 7.
IP Precedence
(0-7)
Click the drop-down menu to map a Queue ID to a specific IP precedence.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 133 Configuration > QoS > General > IP Precedence Mapping (continued)
LABEL DESCRIPTION
Table 134 Configuration > QoS > Trust Mode
LABEL DESCRIPTION
Global
Trust Mode Select the Trust Mode from the dropdown list.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.