Chapter 7 Network Settings
HES-309M Series User’s Guide
102
This screen contains the following fields:
7.16 Content Filter
Use these settings to allow ("whitelist") or block ("blacklist") connections to and
from specific web sites through the WiMAX Device.
Click Network Setting > Content Filter to open this screen as shown next.
Figure 43 Content Filter Screen
Table 35 DDNS
LABEL DESCRIPTION
Enable Dynamic
DNS
Select this to enable dynamic DNS on the WiMAX Device.
Service
Provider
Select the dynamice DNS service provider for the WiMAX Device.
Service Type Select the dynamic DNS service type.
Domain Name Enter the domain name.
Login Name Enter the user name.
Password Enter the password.
IP Update Policy Select the policy used by the WiMAX Device. Options are:
•Auto Detect
•WAN
•User Defined
User Defined IP If chose “User Defined” for the IP Update Policy, enter the user
defined IP address.
Wildcards Select this to allow a hostname to use wildcards such as “*”.
MX Select this to enable mail routing, if supported by the specified DYNDNS
service provider.
Backup MX Select this to enable a secondary mail routing, if supported by the
specified DYNDNS service provider.
MX Host Enter the host to which mail is routed when the MX option is selected.
To Next Page
Loading...
