Chapter 4 Tutorials
HES-309M Series User’s Guide
32
Note: You may need to configure the computers on your LAN to automatically obtain
IP addresses. For information on how to do this, see Appendix B on page 151.
Once your network is configured and hooked up, you will want to connect it to the
Internet next. To do this, just run the Internet Connection Wizard (Chapter 3
on page 23), which walks you through the process.
4.4 Changing Certificate
This tutorial shows you how to import a new security certificate, which allows your
device to communicate with another network servers.
Goal: Import a new security certificate into the WiMAX Device.
See Also: Appendix E on page 201.
1 Go to the WiMAX > Profile > Authentication Settings screen. In the EAP
Supplicant section, click each Browse button and locate the security certificates
that were provided by your new ISP.
s
2 Configure your new Internet access settings based on the information provided by
the ISP.
Note: You can also use the Internet Connection Wizard to configure the Internet
access settings.
To Next Page
Loading...
