Chapter 10 Troubleshooting
HES-309M Series User’s Guide
142
You will lose all of your changes when you push the Reset button.
To reset the WiMAX Device,
1 Make sure the Power LED is on and not blinking.
2 Press and hold the Reset button for five to ten seconds. Release the Reset button
when the Power LED begins to blink. The default settings have been restored.
If the WiMAX Device restarts automatically, wait for the WiMAX Device to finish
restarting, and log in to the web configurator. The password is “1234”.
If the WiMAX Device does not restart automatically, disconnect and reconnect the
WiMAX Device’s power. Then, follow the directions above again.
10.4.1 Pop-up Windows, JavaScript and Java Permissions
Please see Appendix C on page 179.
To Next Page
Loading...
