Chapter 7 Network Settings
HES-309M Series User’s Guide
86
This screen contains the following fields:
7.9 RIP
Use these settings to configure how the WiMAX Device exchanges information with
other routers.
Click Network Setting > Route > RIP to open this screen as shown next.
Figure 33 RIP Screen
Table 26 Static Route
LABEL DESCRIPTION
Destination This field displays the destination IP address of the static route.
Subnet Mask This field displays the subnet mask of the static route.
Next Hop This field displays next hop information of the static route.
Metric This field displays the static route metric.
Add Click this to add a new static route to the list.
To Next Page
Loading...
