ZyXEL Communications HES-309M - Port Forwarding Wizard

Chapter 7 Network Settings
HES-309M Series User’s Guide
89
7.10.1 Port Forwarding Wizard
Use this wizard to set up a port forwarding rule for incoming service requests to
the ports on your local network.
Click Network Setting > NAT > Port Forwarding > Wizard to open this
screen as shown next.
Figure 35 Port Forwarding Wizard Screen
This screen contains the following fields:
Table 29 Port Forwarding Wizard
LABEL DESCRIPTION
Active Select this to make this port forwarding rule active.
Port Forward
Rule
Select the type of port forwarding rule.
Rule Name Enter a name for the port forwarding rule.
Protocol Select the port forwarding protocol.
Incoming Start
Port
Enter the starting port number for incoming traffic for the port
forwarding rule.
Incoming End
Port
Enter the ending port number for incoming traffic for the port
forwarding rule.
Forwarding
Start Port
Enter the starting port number for forwarded traffic for the port
forwarding rule.
Forwarding End
Port
Enter the ending port number for forwarded traffic for the port
forwarding rule.
Server IP Enter the port forwarding server IP address.