Chapter 9 Maintenance
HES-309M Series User’s Guide
130
9.12 Upgrade Link
Use this screen to set the URL of a firmware file on a remote computer and upload
it to the WiMAX Device.
Click Maintenance > Firmware Upgrade > Upgrade Link to open this screen
as shown next.
Figure 61 Upgrade Link Screen
This screen contains the following fields:
9.13 CWMP Upgrade
Use this screen to upgrade the firmware on the WiMAX Device using CWMP
Request Download.
Click Maintenance > Firmware Upgrade > CWMP Upgrade to open this
screen as shown next.
Figure 62 CWMP Upgrade Screen
Table 51 Upgrade Link
LABEL DESCRIPTION
Upgrade Link Enter the URL or IP address of the firmware’s upgrade location on the
network.
Upgrade Click this to begin uploading the selected file. This may take up to two
minutes.
Note: Do not turn off the device while firmware upload is in
progress!
To Next Page
Loading...
