Chapter 3 Setup Wizard
HES-309M Series User’s Guide
27
3.1.4 WiMAX Authentication Settings
The WiMAX Authentication Settings screen allows you to configure how your
WiMAX Device logs into the service provider’s network.
Note: These settings should be provided by your ISP.
Figure 7 Setup Wizard > WiMAX Authentication Settings
The following table describes the labels in this screen.
Table 7 Setup Wizard > WiMAX Authentication Settings
LABEL DESCRIPTION
Authentication
Authenticati
on Mode
Select a WiMAX authentication mode for authentication network
sessions with the ISP. Options are:
• No authentication
• User authentication
• Device authentication
• User and Device authentication
EAP Supplication
EAP Mode Select an EAP authentication mode.
Anonymous
Id
Enter your anonymous ID.
Note: Some modes may not require this.
Inner Mode Select an inner authentication mode.
Note: Some modes may not require this.
To Next Page
Loading...
