HES-309M Series User’s Guide
29
CHAPTER 4
Tutorials
4.1 Overview
This chapter shows you how to configure some of the WiMAX Device’s features.
Note: Be sure to read The Web Configurator on page 19 before working through the
tutorials presented here. For field descriptions for individual screens, see the
related technical reference in this User's Guide.
This chapter includes the following configuration examples:
• WiMAX Connection Settings on page 29
• Configuring LAN DHCP on page 30
• Changing Certificate on page 32
• Blocking Web Access on page 33
• Configuring the MAC Address Filter, see page 34
• Setting Up NAT Port Forwarding, see page 36
• Access the WiMAX Device Using DDNS, see page 39
• Configuring Static Route for Routing to Another Network, see page 40
• Remotely Managing Your WiMAX Device on page 43
4.2 WiMAX Connection Settings
This tutorial provides you with pointers for configuring the WiMAX Device to
connect to an ISP.
1 Connect the WiMAX Device to the ISP’s nearest base station. See Section 6.2 on
page 55.
2 Configure the WiMAX Device’s broadcast frequency. Section 6.3 on page 57.
3 Configure the WiMAX Device to connect securely to the ISP’s authentication
servers. See Section 6.4 on page 60.
To Next Page
Loading...
