Chapter 7 Network Settings
HES-309M Series User’s Guide
80
7.3 PPPoE
Use these settings to configure the PPPoE connection between the WiMAX Device
and the service provider.
Click Network Setting > WAN > PPPoE
Figure 27 PPPoE Screen
Clone MAC
Address
Enter a MAC address here for registering bridged devices on the
network if their current MAC addresses are causing problems. For
example, this can happen when a desktop computer swaps network
interface cards; the original NIC may have used its MAC address to
register itself on the network and now the new NIC is unrecognized.
Using a MAC address that you know is valid, i.e. a “clone”, allows that
device to stay registered.
First~Third DNS
Server
Select how the WiMAX Device acquires its DNS server address.
• From ISP - Select this to have the WiMAX Device acquire its DNS
server address from the ISP.
• User Define - Select this to manually enter the DNS server used by
the WiMAX Device.
Table 20 WAN (continued)
LABEL DESCRIPTION
To Next Page
Loading...
