ZyXEL Communications HES-309M - The Web Configurator; Accessing the Web Configurator

HES-309M Series User’s Guide
19
CHAPTER 2
The Web Configurator
2.1 Overview
The Web Configurator is an HTML-based management interface that allows easy
device set up and management via any web browser that supports: HTML 4.0,
CSS 2.0, and JavaScript 1.5, and higher. The recommended screen resolution for
using the web configurator is 1024 by 768 pixels and 16-bit color, or higher.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled
by default in many operating systems and web browsers.
• JavaScript (enabled by default in most web browsers).
• Java permissions (enabled by default in most web browsers).
See the Appendix C on page 179 for more information on configuring your web
browser.
2.1.1 Accessing the Web Configurator
1 Make sure your WiMAX Device hardware is properly connected (refer to the Quick
Start Guide for more information).
2 Launch your web browser.
3 Enter "" as the URL.
4 Enter the default Username (admin) and Password (1234), then click Login.
The Main screen displays.
Note: For security reasons, the WiMAX Device automatically logs you out if you do
not use the Web Configurator for five minutes. If this happens, log in again.