Chapter 9 Maintenance
HES-309M Series User’s Guide
133
Quick Start Guide or the appendices for details on how to set up your computer’s
IP address.
You might have to open a new browser to log in again.
If the upload was not successful, you are notified with an error message.
9.16 Factory Defaults
Use this screen to restore the WiMAX Device to its factory default settings.
Click Maintenance > Backup/Restore > Factory Defaults to open this screen
as shown next.
Figure 65 Factory Defaults Screen
This screen contains the following fields:
9.17 Log Setting
Use this screen to configure which type of events on the WiMAX Device are
logged.
Click Maintenance > Log > Log Setting to open this screen as shown next.
Figure 66 Log Setting Screen
Table 55 Factory Defaults
LABEL DESCRIPTION
Reset Click this to clear all user-entered configuration information and return
the WiMAX Device to its factory defaults. There is no warning screen.
To Next Page
Loading...
