Chapter 9 Maintenance
HES-309M Series User’s Guide
131
This screen contains the following fields:
9.14 Backup
Use this screen to backup your current WiMAX Device settings to a local computer.
Click Maintenance > Backup/Restore > Backup to open this screen as shown
next.
Figure 63 Backup/Restore Screen
This screen contains the following fields:
Table 52 CWMP Upgrade
LABEL DESCRIPTION
Upgrade Click this to begin upgrading firmware using CWMP Request. This may
take up to two minutes.
Note: Do not turn off the device while firmware upload is in
progress!
Table 53 Backup/Restore
LABEL DESCRIPTION
Backup Click this to save the WiMAX Device’s current configuration to a file on
your computer. Once your device is configured and functioning properly,
it is highly recommended that you back up your configuration file before
making configuration changes. The backup configuration file is useful if
you need to return to your previous settings.
To Next Page
Loading...
