ZyXEL Communications HES-309M - Cwmp

Chapter 9 Maintenance
HES-309M Series User’s Guide
123
9.7 CWMP
Use this screen to allow CWMP connections for remote management, firmware
upgrades and troubleshooting.
Click Maintenance > Remote MGMT > CWMP to open this screen as shown
next.
Figure 56 CWMP Screen
This screen contains the following fields:
Table 46 CWMP
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
ACS Server URL Enter the URL or IP address of the auto-configuration server.
Bootstrap
Enable
Select this to enable bootstrap events.
ACS Username
Enter the user name sent when the WiMAX Device connects to the ACS
and which is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
ACS Password Enter the password sent when the WiMAX Device connects to an ACS
and which is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.