Chapter 9 Maintenance
HES-309M Series User’s Guide
124
Perodical
Inform Enable
Select this to allow the WiMAX Device to periodically connect to the ACS
and check for configuration updates.
If you do not enable this feature then the WiMAX Device can only be
updated automatically when the ACS initiates contact with it and if you
selected the checkbox on this screen.
Periodical
Inform Interval
Enter the time interval (in seconds) at which the WiMAX Device
connects to the auto-configuration server.
Connection
Request
Username
Enter the connection request user name that the ACS must send to the
WiMAX Device when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Note: This must be provided by the ACS administrator.
Connection
Request
Password
Enter the connection request password that the ACS must send to the
WiMAX Device when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Note: This must be provided by the ACS administrator.
CA Certificate
File
Click Browse to upload a Certificate Authority (CA) certificate to the
WiMAX Device.
CA Certificate
Info
This displays information about the currently active CA certificate.
Client
Certificate File
Click Browse to upload a client certificate to the WiMAX Device.
Client
Certificate Info
This displays information about the currently active client certificate.
Table 46 CWMP (continued)
LABEL DESCRIPTION
To Next Page
Loading...
