Chapter 7 Network Settings
HES-309M Series User’s Guide
85
7.8 Static Route
Use these settings to create fixed paths through the network.
Click Network Setting > Route > Static Route to open this screen as shown
next.
Figure 32 Static Route Screen
Start IP Enter the start IP address from which the WiMAX Device begins
allocating IP addresses.
End IP Enter the end IP address at which the WiMAX Device ceases allocating
IP addresses.
Lease Time Enter the duration in minutes that devices on the LAN retain their
DHCP-issued IP addresses. At the end of the lease time, they poll the
WiMAX Device for a renewed or replacement IP.
Relay IP Enter the name of the IP address to be used.
DNS Server Assigned by the DHCP Server
First~Third
DNS Server
Select how the WiMAX Device acquires its DNS server address.
• None - Select this to not use a DNS server.
• From ISP - Select this to have the WiMAX Device acquire its DNS
server address from the ISP.
• User Define - Select this to manually enter the DNS server used by
the WiMAX Device.
Static DHCP
MAC
Address
This field displays the MAC address of the static DHCP client connected
to the WiMAX Device.
IP Address This field displays the IP address of the static DHCP client connected to
the WiMAX Device.
Add Click this to add a new static DHCP entry.
OK Click this to save any changes made to this list.
DHCP Leased Hosts
MAC
Address
This displays the MAC address of the DHCP leased host.
IP Address This displays the IP address of the DHCP leased host.
Remaining
Time
This displays the how much time is left on the host’s lease.
Refresh Click this to refresh the list.
Table 25 DHCP (continued)
LABEL DESCRIPTION
To Next Page
Loading...
