ZyXEL Communications HES-309M - Product Specifications; Operation Requirements

HES-309M Series User’s Guide
143
CHAPTER 11
Product Specifications
This chapter gives details about your WiMAX Device’s hardware and firmware
features.
FEATURE DESCRIPTION
Operation Requirements • Storage conditions: –40°C to 60°C, 10% to 95%
humidity
• Operation conditions: –40°C to 65°C, 10% to 90%
humidity (non condensing)
• Operating Humidity: 10% to 95% RH
Power Supply Requirement • DC 48 V, 0.32 A on PoE
• 100 V ~ 240 V ± 10% AC input
LAN Port • RJ-45 Interface
•1 Port
• 10/100BaseT
• AUTO MDI/MDIX
Reset Button / Restore to
Factory Default Button
•System Reset
• System configuration can be restored to factory
default if hold the Reset Button longer than 5 seconds
LAN Status LED (Green /
Yellow)
Green LED for 10M
•ON: Linked
• Blinking: Data transmitting
•OFF: Link off
Yellow LED for 100M
•ON: Linked
• Blinking: Data transmitting
•OFF: Link off
RSSI LED (Green) 5 LED bar : LED 1~5 indicates RSSI
(Power level reception, only on when connected)
• 5 LED : -50dBm < RSSI
• 4 LED : -50dBm <= RSSI > -60dBm
• 3 LED : -60dBm <= RSSI > -70dBm
• 2 LED : -70dBm <= RSSI > -80dBm
• 1 LED : -80dBm <= RSSI > -90dBm
• 0 LED : -90dBm >= RSSI