Chapter 9 Maintenance
HES-309M Series User’s Guide
119
9.3 HTTP
Use this screen to allow remote access to the WiMAX Device from a network
connection over HTTP.
Click Maintenance > Remote MGMT > HTTP to open this screen as shown
next.
Figure 52 HTTP Screen
This screen contains the following fields:
New
Username
Enter the new username.
Password Enter the password for this username.
Table 41 Password (continued)
LABEL DESCRIPTION
Table 42 HTTP
LABEL DESCRIPTION
HTTP Server
Enable Select this to enable remote management using this service.
Port Number Enter the port number this service can use to access the WiMAX Device.
The computer must use the same port number.
HTTPS Server
Enable Select this to enable remote management using this service.
Port Number Enter the port number this service can use to access the WiMAX Device.
The computer must use the same port number.
HTTP and HTTPS
To Next Page
Loading...
