Chapter 7 Network Settings
HES-309M Series User’s Guide
82
7.4 GRE
Use these settings to configure the peer setting of the Generic Routing
Encapsulation (GRE) tunnel between the WiMAX Device and another GRE peer.
Click Network Setting > WAN > GRE to open this screen as shown next.
Figure 28 GRE Screen
This screen contains the following fields:
7.5 EtherIP
Use these settings to configure the peer setting of the EtherIP tunnel between the
WiMAX Device and another EtherIP peer.
Click Network Setting > WAN > EtherIP to open this screen as shown next.
Figure 29 EtherIP Screen
This screen contains the following fields:
Table 22 GRE
LABEL DESCRIPTION
Peer IP Address Enter the IP address of the GRE peer.
Table 23 EtherIP
LABEL DESCRIPTION
Peer IP Address Enter the IP address of the EtherIP peer.