Chapter 7 Network Settings
HES-309M Series User’s Guide
95
7.14 UPnP
Use this page to enable the UPnP networking protocol on your WiMAX Device and
allow easy network connectivity with other UPnP-compatible devices.
Click Network Setting > UPnP to open this screen as shown next.
Figure 41 UPnP Screen
This screen contains the following fields:
7.14.1 Installing UPnP in Windows XP
Follow the steps below to install the UPnP in Windows XP.
1 Click Start > Control Panel.
2 Double-click Network Connections.
3 In the Network Connections window, click Advanced in the main menu and
select Optional Networking Components ….
Table 34 UPnP
LABEL DESCRIPTION
Enable UPnP Select this to enable UPnP on the WiMAX Device.
Enable NAT-PMP Select this to enable NAT Port Mapping Protocol on the WiMAX Device.
To Next Page
Loading...
