Chapter 7 Network Settings
HES-309M Series User’s Guide
88
Click Network Setting > NAT > Port Forwarding to open this screen as shown
next.
Figure 34 Port Forwarding Screen
This screen contains the following fields:
Table 28 Port Forwarding
LABEL DESCRIPTION
Active This indicates whether the port forwarding rule is active or not.
Name The displays the name of the port forwarding rule.
Protocol This displays the protocol to which the port forwarding rule applies.
Incoming Port(s)
Start Port This displays the starting port number for incoming traffic for the port
forwarding rule.
End Port This displays the ending port number for incoming traffic for the port
forwarding rule.
Forward Port(s)
Start Port
This field displays the beginning of the range of port numbers forwarded
by this rule.
End Port This field displays the end of the range of port numbers forwarded by
this rule. If it is the same as the Start Port, only one port number is
forwarded.
Server IP This displays the IP address of the server to which packet for the
selected port(s) are forwarded.
Delete Click this to delete a specified rule.
Wizard Click this to open the port forwarding “wizard”.
Add Click this to add a new port forwarding rule.
OK Click this to save any changes made to the port forwarding list.
To Next Page
Loading...
