Chapter 4 Tutorials
HES-309M Series User’s Guide
31
3 Type http://192.168.100.1 in your browser after the WiMAX Device finishes
starting up completely.
4 Log into the Web Configurator and open the Networking Setting > LAN >
DHCP screen.
5 Select Server for the DHCP mode, then enter 192.168.100.10 and
192.168.100.30 as your DHCP starting and ending IP addresses.
6 Leave the other settings as their defaults and click Save.
7 Next, go to the Networking Setting > WAN screen and select NAT in the
Operation Mode field. Click Save.
8 Connect your computers to the WiMAX Device’s Ethernet ports and you’re all set!
To Next Page
Loading...
