Chapter 6 WiMAX
HES-309M Series User’s Guide
68
CINR Std Dev This field displays the average Carrier to Interference plus Noise Ratio
(Std Dev) for the current connection. This value is an indication of
overal radio signal quality, where a higher value means a better quality
signal.
Frequency This field displays the frequency in kilohertz (KHz).
TX Power This field displays the transmission power of the WiMAX Device in dBm.
UL MCS This field displays the Uplink Modulation and Coding Sequence (UL
MCS).
DL MCS This field displays the Downlink Modulation and Coding Sequence (DL
MCS).
RF Temperature This field displays the temperature of the WiMAX Device’s RF circuit.
Table 15 Link Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
