NBG-419N v2 User’s Guide 101
CHAPTER 12
Wireless LAN
12.1 Overview
This chapter discusses how to configure the wireless network settings in your Router. See the
appendices for more detailed information about wireless networks.
The following figure provides an example of a wireless network.
Figure 72 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are
called wireless clients. The wireless clients use the access point (AP) to interact with other devices
(such as the printer) or with the Internet. Your Router is the AP.
12.2 What You Can Do
•Use the General screen (Section 12.4 on page 104) to enable the Wireless LAN, enter the SSID
and select the wireless security mode.
•Use the MAC Filter screen (Section 12.5 on page 108) to allow or deny wireless stations based
on their MAC addresses from connecting to the Router.
To Next Page
Loading...
