Chapter 11 Tutorials
NBG-419N v2 User’s Guide
96
11.6 Automatically Connecting to a USB Printer
Your computer can connect to a shared USB printer by using the ZyXEL NetUSB Share Center
Utility. This tutorial shows you how to set your computer to automatically connect to a shared USB
printer over your Router network each time you log into your computer.
1 Install the ZyXEL NetUSB Share Center Utility to your computer. See Chapter 2 on page 20 for
details on the installation.
2 Connect a USB printer to one of the USB ports of the Router.
3 Open the ZyXEL NetUSB Sharing Center Utility on your computer. The name of the USB printer
automatically shows in the Utility screen.
4 Click on the printer name. Then click Connect. Your computer will search for the printer driver. You
may be prompted to install the driver. Follow the driver’s installation steps to finish installing.
5 Click the Auto-Connect Printer menu and select Set Auto-Connect Printer from the menu.
To Next Page
Loading...
