ZyXEL Communications NBG-419N v2 - Connecting to USB Storage with the Zyxel Netusb Share Center Utility; Multiple Connections to the USB Device

Chapter 11 Tutorials
NBG-419N v2 User’s Guide
94
11.5 Connecting to USB Storage with the ZyXEL NetUSB
Share Center Utility
This tutorial shows you how to connect to a USB device over your Router network by using the
ZyXEL NetUSB Share Center Utility.
1 Install the ZyXEL NetUSB Share Center Utility on the computer to which you want to connect the
USB device. See Chapter 2 on page 20 for details on the installation.
2 Connect a USB device to one of the USB ports of the Router.
3 Open the ZyXEL NetUSB Sharing Center Utility on your computer. The name of the USB device
automatically shows in the Utility screen.
4 Click on the USB device’s name. Then click Connect.
5 The device mounts on your system.
11.5.1 Multiple Connections to the USB Device
The Utility supports one connection to the Router’s USB device at a time. If more than one
computer want to connect to the USB device, follow the steps below: