Chapter 15 DHCP Server
NBG-419N v2 User’s Guide
136
15.4 Advanced Screen
This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses. You can also use this screen to configure the DNS server information that the
Router sends to the DHCP clients.
To change your Router’s static DHCP settings, click Network > DHCP Server > Advanced. The
following screen displays.
Figure 97 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
Pool Size This field specifies the size, or count of the IP address pool for LAN.
Apply Click Apply to save your changes back to the Router.
Reset Click Reset to begin configuring this screen afresh.
Table 61 Network > DHCP Server > General (continued)
LABEL DESCRIPTION
Table 62 Network > DHCP Server > Advanced
LABEL DESCRIPTION
LAN Static DHCP Table
# This is the index number of the static IP table entry (row).
MAC Address Type the MAC address (with colons) of a computer on your LAN.
To Next Page
Loading...
