ZyXEL Communications NBG-419N v2 - IP Alias Screen; LAN IP Screen

Chapter 14 LAN
NBG-419N v2 User’s Guide
133
14.4 LAN IP Screen
Use this screen to change the IP address for your Router. Click Network > LAN > IP.
Figure 94 Network > LAN > IP
The following table describes the labels in this screen.
14.5 IP Alias Screen
Use this screen to have the Router apply IP alias to create LAN subnets. Click LAN > IP Alias.
Figure 95 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 59 Network > LAN > IP
LABEL DESCRIPTION
IP Address Type the IP address of your Router in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your Router will
automatically calculate the subnet mask based on the IP address that you assign. Unless
you are implementing subnetting, use the subnet mask computed by the Router.
Apply Click Apply to save your changes back to the Router.
Reset Click Reset to begin configuring this screen afresh.
Table 60 Network > LAN > IP Alias
LABEL DESCRIPTION
IP Alias Check this to enable IP alias.
IP Address Type the IP alias address of your Router in dotted decimal notation.