Chapter 7 Easy Mode
NBG-419N v2 User’s Guide
53
7.4 Navigation Panel
Use this navigation panel to opt out of the Easy mode.
Figure 33 Control Panel
The following table describes the labels in this screen.
7.5 Network Map
Note: The Network MAP is viewable by Windows XP (need to install patch), Windows
Vista and Windows 7 users only. For Windows XP (Service Pack 2) users, you can
see the network devices connected to the Router by downloading the LLTD (Link
Layer Topology Discovery) patch from the Microsoft Website.
Note: Don’t worry if the Network Map does not display in your web browser. This feature
may not be supported by your system. You can still configure the Control Panel
(Section 7.6 on page 54) in the Easy Mode and the Router features that you want to
use in the Expert Mode.
When you log into the Network Configurator, the Network Map is shown as follows.
Figure 34 Network Map
Table 22 Control Panel
ITEM DESCRIPTION
Home Click this to go to the Login page.
Expert Mode Click this to change to Expert mode and customize features of the Router.
Logout Click this to end the Web Configurator session.
To Next Page
Loading...
