Chapter 5 Monitor
NBG-419N v2 User’s Guide
47
5.7 WLAN Station Status
Click the WLAN Station Status (Details...) hyperlink in the Status screen. View the wireless
stations that are currently associated to the Router in the Association List. Association means
that a wireless client (for example, your network or computer with a wireless network card) has
connected successfully to the AP (or wireless router) using the same SSID, channel and security
settings.
Figure 30 Summary: Wireless Association List
The following table describes the labels in this screen.
Collisions This is the number of collisions on this port.
Tx B/s This displays the transmission speed in bytes per second on this port.
Rx B/s This displays the reception speed in bytes per second on this port.
Up Time This is the total time the Router has been for each session.
System Up
Time
This is the total time the Router has been on.
Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this field.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval(s) field.
Stop Click Stop to stop refreshing statistics.
Table 20 Summary: Packet Statistics (continued)
LABEL DESCRIPTION
Table 21 Summary: Wireless Association List
LABEL DESCRIPTION
# This is the index number of an associated wireless station.
MAC Address This field displays the MAC address of an associated wireless station.
Association
Time
This field displays the time a wireless station first associated with the Router’s WLAN
network.
Refresh Click Refresh to reload the list.
To Next Page
Loading...
