NBG-419N v2 User’s Guide 43
CHAPTER 5
Monitor
5.1 Overview
This chapter discusses read-only information related to the device state of the Router.
Note: To access the Monitor screens, you can also click the links in the Summary table of
the Status screen to view the bandwidth consumed, packets sent/received as well
as the status of clients connected to the Router.
5.2 What You Can Do
•Use the Log (Section 5.3 on page 43) screen to see the logs for the activity on the Router.
•Use the BW MGMT Monitor screen (Section 5.4 on page 45) to view the amount of network
bandwidth that applications running in the network are using.
•Use the DHCP Table screen (Section 5.5 on page 45) to view information related to your DHCP
status.
•use the Packet Statistics screen (Section 5.6 on page 46) to view port status, packet specific
statistics, the "system up time" and so on.
•Use the WLAN Station Status screen (Section 5.7 on page 47) to view the wireless stations
that are currently associated to the Router.
5.3 The Log Screen
The Web Configurator allows you to look at all of the Router’s logs in one location.
5.3.1 View Log
Use the View Log screen to see the logged messages for the Router. The log wraps around and
deletes the old entries after it fills. Select what logs you want to see from the Display drop list. The
To Next Page
Loading...
