ZyXEL Communications NBG-419N v2 - Weather Edit

Chapter 4 Introducing the Web Configurator
NBG-419N v2 User’s Guide
40
4.2.3.1 Weather Edit
You can change the temperature unit and select the location for which you want to know the
weather.
Click the icon to change the Weather display.
Figure 23 Change Weather
The following table describes the labels in this screen.
4.2.3.2 Time/Date Edit
One timezone can cover more than one country. You can choose a particular country in which the
Router is located and have the Router display and use the current time and date for its logs.
Click the icon to change the Weather display.
Figure 24 Change Password Screen
The following table describes the labels in this screen.
Note: You can also edit the timezone in Section 25.5 on page 181.
(This is just an example). This shows the current weather, either in celsius or fahrenheit, of
the city you specify in Section 4.2.3.1 on page 40.
(This is just an example). This shows the time (hh:mm:ss) and date (yyyy:mm:dd) of the
timezone you select in Section 4.2.3.2 on page 40 or Section 25.5 on page 181.
Table 16 Home Screen (continued)
LABEL DESCRIPTION
Table 17 Change Weather
LABEL DESCRIPTION
o
C or
o
F Choose which temperature unit you want the Router to display.
Change
Location
Select the location for which you want to know the weather. If the city you want is not listed,
choose one that is closest to it.
Finish Click this to apply the settings and refresh the date and time display.
Table 18 Change Password Screen
LABEL DESCRIPTION
Change time
zone
Select the specific country whose current time and date you want the Router to display.
Finish Click this to apply the settings and refresh the weather display.