ZyXEL Communications NBG-419N v2 - Configuring Your WLAN, Bandwidth Management and Maintenance Settings

Chapter 9 Access Point Mode
NBG-419N v2 User’s Guide
71
4 After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “192.168.1.2” as the web address in your web browser.
Note: After clicking Login, the Easy mode appears. Refer to page 51 for the Easy mode
screens. Change to Expert mode to see the screens described in the sections
following this.
9.3.3 Configuring your WLAN, Bandwidth Management and Maintenance
Settings
The configuration of wireless, bandwidth management and maintenance settings in Access Point
mode is the same as for Router Mode.
•See Chapter 12 on page 101 for information on the configuring your wireless network.
•See Chapter 22 on page 161 for information on configuring your Bandwidth Management screen.
•See Chapter 25 on page 179 to Chapter 25 on page 179 for information on configuring your
Maintenance settings.