Chapter 25 Maintenance
NBG-419N v2 User’s Guide
181
25.5 Time Setting Screen
Use this screen to configure the Router’s time based on your local time zone. To change your
Router’s time and date, click Maintenance > Time. The screen appears as shown.
Figure 130 Maintenance > Time
The following table describes the labels in this screen.
Table 81 Maintenance > Time
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your Router.
Each time you reload this page, the Router synchronizes the time with the time server.
Current Date This field displays the date of your Router.
Each time you reload this page, the Router synchronizes the date with the time server.
Current Time and Date
Manual Select this radio button to enter the time and date manually. If you configure a new time
and date, Time Zone and Daylight Saving at the same time, the new time and date you
entered has priority and the Time Zone and Daylight Saving settings do not affect it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time configured
manually.
When you select Manual, enter the new time in this field and then click Apply.
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last date configured
manually.
When you select Manual, enter the new date in this field and then click Apply.
To Next Page
Loading...
