NBG-419N v2 User’s Guide 117
CHAPTER 13
WAN
13.1 Overview
This chapter discusses the Router’s WAN screens. Use these screens to configure your Router for
Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the
Internet. It connects your private networks such as a LAN (Local Area Network) and other
networks, so that a computer in one location can communicate with computers in other locations.
Figure 84 LAN and WAN
13.2 What You Can Do
•Use the Internet Connection screen (Section 13.4 on page 119) to enter your ISP information
and set how the computer acquires its IP, DNS and WAN MAC addresses.
•Use the Advanced screen (Section 13.5 on page 128) to enable multicasting, configure Windows
networking and bridge.
•Use IGMP Blocking screen (Section 13.6 on page 129) to enable IGMP blocking in the LAN
ports.
13.3 What You Need To Know
The information in this section can help you configure the screens for your WAN connection, as well
as enable/disable some advanced features of your Router.
To Next Page
Loading...
