Chapter 13 WAN
NBG-419N v2 User’s Guide
126
13.4.4 L2TP Encapsulation
The Layer 2 Tunneling Protocol (L2TP) works at layer 2 (the data link layer) to tunnel network traffic
between two peer devices over another network (like the Internet).
This screen displays when you select L2TP encapsulation.
Figure 89 Network > WAN > Internet Connection: L2TP Encapsulation
The following table describes the labels in this screen.
Table 56 Network > WAN > Internet Connection: L2TP Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Connection
Type
To configure a L2TP client, you must configure the User Name and Password fields for a
layer-2 connection and the L2TP parameters for an L2TP connection.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
Retype to
Confirm
Type your password again to make sure that you have entered is correctly.
To Next Page
Loading...
