Chapter 22 Bandwidth Management
NBG-419N v2 User’s Guide
163
Note: The two tables shown in this screen can be configured and applied at the same
time.
Click Management > Bandwidth Management > Advanced to open the bandwidth
management Advanced screen.
Figure 113 Management > Bandwidth Management > Advanced
The following table describes the labels in this screen.
Table 73 Management > Bandwidth Management > Advanced
LABEL DESCRIPTION
Management Bandwidth
Upstream
Bandwidth
Select the total amount of bandwidth (from 64 Kilobits to 32 Megabits) that you want to
dedicate to uplink traffic.
This is traffic from LAN/WLAN to WAN.
Downstream
Bandwidth
Select the total amount of bandwidth (from 64 Kilobits to 32 Megabits) that you want to
dedicate to uplink traffic.
This is traffic from WAN to LAN/WLAN.
Application List Use this table to allocate specific amounts of bandwidth based on a pre-defined service.
To Next Page
Loading...
