Chapter 24 Universal Plug-and-Play (UPnP)
NBG-419N v2 User’s Guide
173
Make sure the computer is connected to a LAN port of the Router. Turn on your computer and the
Router.
24.5.1.1 Auto-discover Your UPnP-enabled Network Device
1 Click start and Control Panel. Double-click Network Connections. An icon displays under
Internet Gateway.
2 Right-click the icon and select Properties.
Figure 119 Network Connections
3 In the Internet Connection Properties window, click Settings to see the port mappings there
were automatically created.
Figure 120 Internet Connection Properties
To Next Page
Loading...
