ZyXEL Communications NBG-419N v2 - Page 233

Appendix C Setting Up Your Computer’s IP Address
NBG-419N v2 User’s Guide
233
4 For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in the TCP/IP
tab.
5 For statically assigned settings, do the following:
•From the Configure IPv4 list, select Manually.
•In the IP Address field, type your IP address.
•In the Subnet Mask field, type your subnet mask.
•In the Router field, type the IP address of your device.
6 Click Apply Now and close the window.